Description
PRODUCT SPECIFICATION RF Frequency Range:500MHz Working Range:50m(approximately 200ft)under typical conditions Audio Frequency Response:50to18,000Hz-3dB Audio Output Level(+-20khz deviation, 1 KHZ tone):1/4-inch connector(into 3k load): -8.8dbv(Hi Z),XLR connector RF Sensitivity:85dbm, typical System Distortion(ef +15 deaton, 1 KHZ modulation):0.4% Power Requirements:Handheld and Bady-pack,3V battery Current Drain: Transmitter: 50MA average(70MA max) Receiver: 100MA average(130mamax) Operating Temperature Range: -20 to 50 (-4"to 122 F ). NOTE: Battery characteristics may limit this range Matters Needing Attention 1. You will need an extra audio equipment like speaker to connect with this product to make the sound working. 2. Please keep the receiver away from the metal or any digital devices (such as computers, cellphones, etc.) to avoid potential sources of interference. 3.The receiver should be more than 1m from the ground. Please avoid to be against a wall. 4.Please do not use the microphone facing the receiver too closely, in order to avoid noise interference. 5. Please do not flap the microphone head with hand, or it would be damaged. 6. During the performance or presentation lid the N/MEOFF sw to the MUTE position when the system is not being used7 When the pomme or present s d e m r N swh o t OFF posion to conserve battery Any problem, please contact us Durable: Rugged metal construction with handheld/flip lapel/headset/waist pack. High quality plastic beltpack with light weight for high sensitivity lavalier microphones and headphone microphones, ideal for small outdoor performances, conference rooms, classrooms, bars, dance halls, KTV rooms and complex high-end professional concert environments to achieve satisfactory results. Clear and pure sound quality: High-quality cardioid moving coil pickup head designed to limit feedback and interference, 4-channel wireless microphone set with fixed frequency design has superb signal stability and eliminates unwanted distortion. The microphone has a built-in high-quality chip to provide clear, smooth and optimal real sound. Wireless Performance Exceeds Expectations: wireless microphone system provides superior signal stability, eliminates radio interference and simplifies your preparation. Equipped with a professional receiver, LCD display showing frequency numbers and individual volume controls for precise vocal balance, the MK240-2 wireless microphone system is perfect for music lovers and sound engineers who need reliable, pristine sound. Rugged Material: PP microphone housing with metal mesh head and metal connectors for extra impact and corrosion resistance Receiver with four XLR outputs and one 1/4'' audio output jack for plug-and-play, easy setup, and individual volume control for each wireless microphone. UHF microphone system with voice compression and expansion technology, microphone with anti-vibration ring, easy to use, powerful and stable performance. Focus on service: 2 x handheld microphone, 1 x receiver case, 2 x lavalier belt pouch, 2 x headphones, 4 x antenna, 1 x user manual. If your microphone has no sound, please make sure your microphone and receiver have enough power.
This wireless mic system is a game-changer! Crystal-clear sound with a solid 50m range, perfect for performances or presentations. The 4-channel UHF ensures no interference, and the battery life is impressive. Easy to set up, lightweight, and delivers professional audio quality without breaking the bank. Highly recommend for anyone needing reliable wireless mics!